Range Extenders
TP-Link AC750 Mesh Wi-Fi Range Extender, Dual-Band Connectivity, 2.4GHz & 5GHz Frequency, 3x Antenna, Up to 433Mbps Signal Rate, 1x Ethernet Port, White | RE200
AED 90
Inclusive of VAT
Only 1 left
4G/LTE (Cat 4), 3G, 2G / 802.11n Wi-Fi Connectivity, up to 150 Mbps Speed 2 x Ethernet Ports, I/O Digital Input/Output, RMS Compatible, Black | RUT200
Price on request
Contact us on WhatsApp for current pricing.
Equipped with 4G LTE, Wi-Fi, and two Ethernet ports, this model is perfect to quickly set up primary and backup connectivity with remote management capabilities.Due to its compact size, industrial design, and I/Os, this model is very suitable in manufacturing, automation, transportation, and other industrial application scenarios that require mission-critical connectivity in rigorous conditions. CONNECTIVITY 4G/LTE (Cat 4), 3G, 2G WAN FAILOVER Automatic switching to available Backup connection WIFI Wireless Access Point with Hotspot functionality COMPACTNESS Small size – easy integration I/O Digital Input/Output for remote monitoring and control RMS Compatible with Teltonika Remote Management System FEATURES
| PoE | PoE++ |
|---|---|
| apn | Auto APN |
| cpu | Mediatek MIPS 24Kc 580 MHz |
| gre | GRE tunnel |
| lan | 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| ram | 128 MB, DDR2 |
| rms | Teltonika Remote Management System (RMS) |
| sim | 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder |
| sms | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| ssh | SSH (v1, v2) |
| wan | 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| call | Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off |
| ddns | Supported >25 service providers, others can be configured manually |
| dhcp | Static and dynamic IP allocation, DHCP Relay, Relayd |
| fota | Firmware update from sever, automatic notification |
| mqtt | MQTT Broker, MQTT publisher |
| snmp | SNMP (v1, v2, v3), SNMP trap |
| ssid | SSID stealth mode and access control based on MAC address |
| sstp | SSTP client instance support |
| vlan | Port and tag based VLAN separation |
| i o s | 1 x Digital Input, 1 x Digital Output on 4 pin power connector |
| input | 1 x Digital input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high |
| ipsec | IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) |
| model | RUT200 |
| power | 1 x 4 pin DC connector |
| reset | Reboot/Factory reset button |
| bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| events | SMS, EMAIL, RMS |
| modbus | MODBUS TCP status/control |
| output | 1 x Digital open collector output, max output 30 V, 300 mA |
| status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID |
| tr 069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| web ui | HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log |
| openvpn | Multiple clients and server can be running simultaneously, 12 encryption methods |
| routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6) |
| stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code |
| antennas | 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors |
| ethernet | 2 x RJ45 ports, 10/100 Mbps |
| firewall | Port forward, traffic rules, custom rules |
| json rpc | Management API over HTTP/HTTPS |
| protocol | HTTP(S), MQTT, Azure MQTT |
| zerotier | ZeroTier VPN |
| connector | 4 pin industrial DC power socket |
| pptp l2tp | Client/Server services can run simultaneously |
| thingworx | Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| wireguard | WireGuard VPN client and server support |
| cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
| web filter | Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
| wifi users | Up to 50 simultaneous connections |
| passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| poe passive | Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt |
| status leds | 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED |
| id filtering | Respond to one ID in range [1;255] or any |
| mqtt gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
| azure iot hub | Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
| flash storage | 16 MB, SPI Flash |
| keep settings | Update FW without losing current configuration |
| mobile module | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| wifi security | WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| authentication | Pre-shared key, digital certificates, X.509 certificates |
| load balancing | Balance your internet traffic over multiple WAN connections |
| network backup | VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover |
| sshfs optional | Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| band management | Band lock, Used band status display |
| cloud of things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
| shipping weight | 0.35 Kg |
| black white list | Operator black/white list |
| custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality |
| operating system | RutOS (OpenWrt based Linux OS) |
| wireless hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
| attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| best sellers rank | #14 in Routers |
| development tools | SDK package with built environment provided |
| network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL) |
| openvpn encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| allow remote access | Allow access through WAN |
| input voltage range | 9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max |
| shipping dimensions | 7.00 cm x 17.50 cm x 15.00 cm |
| supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| supported languages | Busybox shell, Lua, C, C++ |
| mobile quota control | Set up custom data limits for the SIM card |
| connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| multiple pdn optional | Possibility to use different PDNs for multiple network access and services (not available in standard FW) |
| supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) |
| voip passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| qos smart queue management sqm | Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
Specifications are compiled from manufacturer and supplier data. Confirm part numbers for compatibility-critical purchases.
No reviews yet. Bought this product? Share what other buyers should know.
Own this product?
Reviews are open to customers whose order was delivered.
No questions yet. Ask about compatibility, specifications or warranty — we’ll answer and publish it here.
Range Extenders
Inclusive of VAT
Access Points
Inclusive of VAT
Access Points
Inclusive of VAT
Switches
Inclusive of VAT
Range Extenders
Inclusive of VAT
Access Points
Inclusive of VAT
How to build a business network with TP-Link Omada in the UAE — controllers, PoE switches, Wi-Fi 6/7 access points and gateways managed from one platform.
How to plan a Ubiquiti UniFi network for an office, villa or retail store in Dubai — gateways, switches, access points and cameras that work together.
How to choose business networking equipment in Dubai — PoE switches, Wi-Fi access points, routers, controllers and cabinets — and what to ask your supplier.